Line 1:                                GENERIC TECFORM 5.0 INPUT FILE
 
Line 2: MESH INPUT FILE (CELL FILE)        IFORM
 
Line 3: ../grids/grid.mcell.unf             2.0
 
Line 4: SOLUTION FILE (RESTART FILE)       IFORM(2=binary real*8,3=binary real*4)
 
Line 5: ./WRK/restart.unf                  2.0
 
Line 6: OUTPUT FILE                        IFORM(1=*.dat,2=*.plt,3=*.szplt,4=*.vtu)
 
Line 7: testcase_surf_or_vol_file.plt      2.0
 
Line 11: ============================================
 
Line 12: SURFACE (=1) OR VOLUME PLOT (2=Tets and Mixed, 3= Tets Only, 4=Mixed Only)
 
Line 13: 1.0
 
Line 14: ============================================
 
Line 15: NUMBER OF PLOT VARIABLES (MIN=0,MAX=5) (see bottom for available types)
 
Line 16: 4
 
Line 17: IPLOT                      VARIABLE_NAME
 
Line 18: 1.                         density
 
Line 19: 2.                         mach
 
Line 20: 3.                         cptotal
 
Line 21: 4.                         cp
 
Line 22: ============================================
 
Line 23: NO. OF ZONES (min=1, if=0:list *.bcs file for bc based zones) (-1=all patches,-2=all comps,-3=all bodies)
 
Line 24: -2.0
 
Line 25: ../grids/mesh.comp